Category Archives: Automotive
Tuning up your engine and carrying out regular maintenance and care is one of the best ways to lengthen the life of your BMW. Today BMW repairs in Brisbane have gotten a little more sophisticated. The technology evolved to incorporate electronic ignition in modern vehicles along with the fuel injection technology. These technological innovations have enabled the computerization of the vehicle diagnostics process. You only have to take your BMW for servicing at a BMW repairs in Brisbane and a computer box will tell you all that is wrong with your engine.
In today’s BMW vehicles, there is no room for tinkering to try and identify some problems. Today’s repairs and diagnostics require advanced training in handling vehicle equipment at a reliable and reputable repair facility where the technicians are factory-trained and adhere to the highest standards of auto servicing and repairs. If your BMW is seeing a degradation in the performance, there are parts that you replace and you will begin seeing an instant performance boost in your vehicle.
Some of the common maintenance parts that can be replaced in order to boost your vehicle performance include the following:
The Basic Ignition Parts of the Vehicle:
Spark Plugs: They can give you an indication on the condition of the engine. They can be removed and inspected in order to determine whether the engine is running well or whether it has some issues. It is recommended that these be removed and inspected after every 30 miles. This is required even if your BMW car is a low-maintenance one in which case, they should be changed after every 100,000 miles. This regular inspection and spark plug change will prevent the seizing of the plugs in the block which could result in costlier BMW repairs in Brisbane in the future.
When inspecting the plugs, it is important to note the cylinders from they come in order to determine if any particular cylinder some faults that need to be looked at. New plugs will only make a difference in the BMW if they are genuine OE plugs.
Distributor Cap and the Rotor: These will deteriorate with use and with time because they are plastic. When cracks occur in these, moisture will get in and the metallic parts will start corroding which can lead to misfiring. Make sure you make replacements when there is excessive wear or at a manufacturer recommended interval.
Wire sets of the Spark Plugs: These are no longer as problematic as they used to be in the past thanks to the use if new materials and sizing which guarantee greater reliability.
Filters should be changed on a regular basis in order to ensure the longevity of the vehicle.
Oil filter: These are the easiest to replace and should be replaced regularly so as to avoid unnecessary wear of the engine. The engine oil should be replaced after every 3000 miles.
Air filter: These get rid of dirt by trapping dirt particles as their air passes. Replace them after every 20,000 miles or more often in case you drive frequently in dusty areas. If it looks heavily loaded or worn out, replace it regardless of the mileage interval.
Fuel filters: The fuel filter should be replaced on a regular basis in order to ensure the flow of fuel into the engine is not restricted by contaminants that can clog the fuel system. Contaminants in the system generally result in hard-starting, stalling or even loss of the vehicle’s speed power. At least a yearly change is recommended.
Automatic transmission filters: The automatic transmission helps prevent engagement problems, hesitation or even slippage that result from clogged transmissions. The filter should be replaced after every 12,000-15,000 miles. For most importantly, find a good BMW servicing centre in Brisbane that can assure you of a thorough and professional vehicle servicing.